Contents

1. Specifications
2. Performance Graphs

Specifications

Device
Hydrocool Pty Ltd:
Hydro-TEC CPU Chiller

Construction

100%	Pure silver base-tray
99.9%	Copper micro-channels
HS5	Hydrocool convector technology
PPS/PC/ABS	Manifold housing
Ultra-sonic weld	Sealing
Colour	Various

Cooling performance

-4°C to 22 °C	Estimated die temperature 50-100W cooling load
0.01°C/W	Total thermal resistance of hot side HTU
16cm2	Available heat transfer area

Fluid system

2.0 L/min	Recommended flow rate
17kPa	Pressure drop
Distilled water	Cooling fluid
None	Additives required
Blue	Dye colour

Performance Graphs

Click on the links below to view performance graphs for the HydroTEC.

CPU Heat vs. CPU die temperature
This graph estimates CPU die temperature with a Hydro-TEC cooler. Note that results are quoted at a water temperature of 25°C & a flowrate of 2.2 l/min. The Hydro-Stream performance data is also included at the same conditions. If CPU heat will be over 120W, a Hydro-Stream is recommended.

Flow vs. Pressure drop
This graph should be used to select a suitable pump. Pumps with capacity below 10kPa are not recommended.